REMARK: Do not use for construction. Refer to factory certified dimensions & weights. This page includes data current at time of publication, which should be reconfirmed at the time of purchase. In the interest of product improvement, specifications, weights and dimensions are subject to change without notice.

General notes

1. Standard refrigerant connection sizes are ND 100 BSP MPT inlet and outlet (for models VXC 14 through 28 refrigerant connection sizes are ND 80 BSP MPT), consult your local BAC representative for size and location. Other connection sizes are available on special order. Refrigerant connections are standard bevelled for welding.
2. Make up, overflow, suction, drain connection and access door can be provided on side opposite to that shown; consult your BAC representative.
3. Unit height is indicative, for precise value refer to certified print.
4. Shipping/operating weights indicated are for units without accessories such as sound attenuators, discharge hoods, etc. Consult factory certified prints to obtain weight additions and the heaviest section to be lifted.
5. The drawing units with only one spray pump show the standard right hand arrangement has the air inlet side on the right when facing the connection end . Left hand can be furnished by special order.
6. Coil, overflow, make-up and spray water connections are always located on the same end of the unit. For double pump units an additional overflow connection will be installed on the other end of the unit.
7. On model VXC 14 through VXC 135 access doors are located at the opposite of the air inlet side, ensure sufficient space for entry when positioning these units.
8. For indoor applications of evaporative condensers, the room may be used as a plenum with ductwork attached to the discharge only. If inlet ductwork is required, an enclosed fan section must be specified; consult your BAC representative for details.
9. Fan kW is at 0 Pa ESP. To operate against external static pressure up to 125 Pa, increase each fan motor one size.
10. Refrigerant charge listed is R717 operating change. To determine operating charge of R 22 refrigerant, multiply by: 1,93. For R134A, multiply by : 1.98.
11. For dry operation, standard motors must be increased one size to avoid motor overloading. Extended surface coils are available to vastly increase dry capacity without motor size increase. Consult your Bac Representative for selection and pricing.
12. Models VXC 357-454, VXC 562-380, VXC 495-516 and VXC 725-804 have only 1 coil casing section and one or two fan motors. Fan cycling results in only on-off operation. On these units all fans need to operate simultaneously.
13. Models VXC 714-907, VXC 1124-1360, VXC 990-1032 and VXC 1430-1608 have 2 coils casing sections and one or two fan motors per coil casing section. Fan cycling results in only-off operation. On these units all fans need to operate simultaneously per coil casing section.

Last update: 08/12/2024

Sound attenuation XC

VXC_sound_attenuation_XC

1. Access door; L = Unit Length; W = Unit Width; H = Unit Height (see Engineering data).

Model Unit + Atten # pieces shipped # Access Doors Dimensions (mm) Weights (kg)
Discharge Intake W2 H1 W1 L1 L2 Intake Solid Bottom Discharge Total
14-28 41 1 2 N.A. 1090 1030 890 902 N.A. 30 N.A. N.A.
36-65 41 1 2 N.A. 1090 1030 1800 1816 N.A. 50 N.A. N.A.
72-97 4 1 2 N.A. 1090 1030 2710 2731 N.A. 70 N.A. N.A.
110-135 4 1 2 N.A. 1090 1030 3635 3645 830 100 N.A. N.A.
150-205 4 1 2 3728 1600 1420 3635 3645 1080 120 1070 2270
221-265 4 1 2 4687 2070 1955 3525 3645 1420 190 1330 2940
S288-S350 4 1 2 4687 2070 2365 3550 3645 1420 190 1640 3250
S403-S504 4 2 2 4687 2070 2365 5385 5480 1970 300 2240 4510
S576-S700 7 2 2 4687 2070 2365 7200 7322 2840 380 3280 6500
S806-S1010 7 4 2 4687 2070 2365 10885 10998 3940 600 4480 9020
357-454 4 1 2 5290 2560 2965 3525 3645 1620 230 1820 3670
562-680 4 2 2 5290 2560 2965 5365 5480 2240 350 2490 5080
714-908 7 2 2 5290 2560 2965 7050 7322 3240 460 3640 7340
1124-1360 7 4 2 5290 2560 2965 10730 10994 4480 700 4980 10160
495-516 4 1 2 5897 2560 3575 3525 3645 1620 280 2130 4030
715-804 4 2 2 5897 2560 3575 5365 5480 2240 420 2920 5580
990-1032 7 2 2 5897 2560 3575 7050 7322 3240 560 4260 8060
1430-1608 7 4 2 5897 2560 3575 10730 10994 4480 840 5840 11160